Filter
Top Products
VIVOTEK
User's Manual - 63
Network > General settings
This section explains how to congure a wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed on a local area network (LAN) and is
intended to be accessed by local computers� The default setting for the Network Type is LAN� Please
rememer to click on the Save button when you complete the Network setting�
Get IP address automatically: Select this option to obtain an available dynamic IP address assigned
by the DHCP server each time the camera is connected to the LAN�
Use fixed IP address: Select this option to manually assign a static IP address to the Network
Camera�
1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the
Network Camera on LAN� Please refer to Software Installation on page 13 for details�
2� Enter the Static IP, Subnet mask, Default router, and Primary DNS provided by your ISP or network
administrator�
Subnet mask: This is used to determine if the destination is in the same subnet. The default value is
“255.255.255.0”.
Default router: This is the gateway used to forward frames to destinations in a different subnet. Invalid
router setting will disable the transmission to destinations across different subnets�