Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
42 - User's Manual
HTTP
Advanced mode
To utilize the HTTP authentication, make sure that your have set a password for the Network Camera
rst; please refer to Security on page 30 for details�
Authentication: Depending on your network security requirements, the Network Camera provides two
types of security settings for a HTTP transaction: basic and digest�
If basic authentication is selected, the password is sent in plain text format; there can be potential risks
of being intercepted� If digest authentication is selected, user credentials are encrypted in MD5 algorithm
and thus provide better protection against unauthorized accesses.
HTTP port / Secondary HTTP port: By default, the HTTP port is set to 80 and the secondary HTTP port is
set to 8080. Also, they can be assigned with another port number between 1025 and 65535. If the ports
are incorrectly assigned, the following warning messages will be displayed:
To access the Network Camera in LAN, both HTTP port and secondary HTTP port can be used to access
the Network Camera. For example, when the HTTP port is set to 80 and the secondary HTTP port is set
to 8080, refer to the list below for the Network Camera’s IP address.
Access name for stream 1 / Access name for stream 2: The access name is used to differentiate the
streaming source�
When using Mozilla Firefox or Netscape to access the Network Camera, and the video mode is set to
JPEG, users will receive continuous JPEG pictures. This technology, known as “server push”, allows the
Network Camera to feed live pictures to Mozilla Firefox and Netscape.
In LAN
http://192.168.4.160 or
http://192.168.4.160:8080