Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
User's Manual - 51
Network: This rule is for user to assign a Network address and corresponding subnet mask to Allow/Deny
list�
For example:
Range: This rule is for user to assign a range of IP address to Allow/Deny list. This rule is only applied to
IPv4�
For example:
■ Delete Allowed/Denied list:
In the Delete allowed list or Delete denied list column, select a list from the list and then click Delete to
delete it�
NOTE
► For example, when the range of allowed list is set from 1.1.1.0 to 192.255.255.255 and the range
of denied list is set from 1.1.1.0 to 170.255.255.255, Only users’ IP located between 171.0.0.0 and
192�255�255�255 can access the Network Camera�
Administrator IP address
Always allow the IP address to access this device: You can check this item and add the Administrator’s
IP address in this eld to make sure the Administrator can always connect to the device.
Alowed
List
Denied
List
IP address 192.168.2.x will be bolcked.