Filter
Top Products
VIVOTEK - A Leading Provider of Multimedia Communication Solutions
62 - User's Manual
NOTE
► How does motion detection work?
There are two parameters for setting the motion detection: Sensitivity and Percentage� In the
illustration above, frame A and frame B are two sequential images. Pixel differences between the
two frames are detected and highlighted in gray (frame C), and will be compared with the sensitivity
setting. Sensitivity is a value that expresses the sensitivity to moving objects. Higher sensitivity
settings are expected to sense a slight movement while smaller sensitivity settings tend to neglect
it. When the sensitivity is set to 70%, the Network Camera denes the pixels in the purple areas as
“alerted pixels” (frame D).
Percentage is a value that expresses the proportion of “alerted pixels” to all pixels in the motion
detection window. In this case, 50% of pixels are identied as “alerted pixels”. When the percentage is
set to 30%, the motions are judged to exceed the dened threshold; therefore, the motion window will
be outlined in red�
For applications that require higher security management, it is suggested to set higher sensitivity
settings and smaller percentage values�
A
B D
C