Filter
Top Products
2.4 LED Status Indicator
The LED status indicator consists of one red and one blue LED. Depending on the
camera’s status, the LEDs will appear as follows:
Red IR LEDs (Left), Blue Status LED (Right)
When the IP camera is turned on, the LEDs will light in the following patterns:
Red LEDs Blue LED Indication
On On System booting
Off On Successfully established network connection
On Off Performing hardware test
Off Off Powered off
Blinking (Every
0.5 seconds)
Off Failed to connect to network/Failed to establish
WPS connection
Off Blinking (Every
0.5 seconds)
Attempting to establish a WPS connection
Off Blinking (Every
0.2 seconds)
Successfully established a WPS connection
Blinking Blinking Attempting to establish a network connection