164
Software Fixes in Release M.08.51 - M.10.72
Release M.10.17
■ DHCP Protection (PR_1000360273) — DHCP Lease renewal packets received on an
untrusted port are dropped.
■ DHCP Protection (PR_1000360254) — An entry with an expired lease is not removed
from the binding table.
■ Link Failure (PR_1000361488) — The J8440B version 10-GbE X2-CX4 may not initialize
correctly, causing link failure.
■ Selftest Failure (PR_1000360970) — A 10-GbE CX4 module (J8434A) will fail selftest
following power cycle or software update if it is connected to another switch that is running
spanning-tree.
Release M.10.17
Problems Resolved in Release M.10.17
■ Crash (PR_1000367036) — When a transceiver or mini-GBIC is hot-swapped the switch
may crash with a message similar to the following.
Software exception at buffers.c:2238 -- in 'mPpmgrCtrl',
task ID = 0x6351358 -> ASSERT: failed
■ Enhancement (PR_1000346164) — RSTP/MSTP BPDU Protection enhancement. See
“Spanning Tree BPDU Protection” on page 91 for details.
Release M.10.18 - Release M.10.19
Releases M.10.18 and M.10.19 were never built.
Release M.10.20
Problems Resolved in Release M.10.20
■ 10-GbE <no PR> — Resolution for failure to initialize the 10-GbE link in port 26 of the
ProCurve 3400cl-24G switch, or port 50 of the ProCurve 3400cl-48G switch, after update to
software version M.10.17. See “Known Issues” on page 24 for additional information.
■ Enhancement (PR_1000355089) — This enhancement increases the maximum number
of 802.1X users per port to 8.
■ Enhancement (PR_1000355877) — 802.1X Controlled Directions enhancement. With this
change, Administrators can use “Wake-on-LAN” with computers that are connected to ports
configured for 802.1X authentication.
