VXA-700 SPIRIT OPERATING MANUAL
26
SPECTRUM SCOPE MONITOR
If you assign the Spectrum Scope Monitor feature to the
key (see page 44), you may view operating activity
on channels above and below the current operating chan-
nel in the VFO mode.
The display indicates the relative signal strength on chan-
nels immediately adjacent to the current operating fre-
quency.
r Set the radio to the VFO mode by pressing the
key, if necessary.
r Press (or press and hold
in) the key to activate
the Spectrum Scope
Monitor.
r Once the Spectrum Scope Monitor is activated, press
the key to change the visible bandwidth between
±15 channel and ±30 channel (default: ±30 channels).
The visible bandwidth, however, depends on the se-
lected channel step size, so match the channel step to
those typically used in your area.
r To turn the Spectrum Scope Monitor off and operate
on the centered (and displayed) channel, simply press
PTT switch.
Note: Audio output will be interrupted during Spectrum
Analyzer operation. This is normal.
