VXA-700 SPIRIT OPERATING MANUAL
48
CPU RESETTING
In some instances of erratic or unpredictable operation, the
cause may be corruption of data in the microprocessor (due
to static electricity, etc.). If this happens, resetting of the
microprocessor may restore normal operation. Note that
all memories will be erased if you do a complete micropro-
cessor reset, as described below.
To clear all memories and other settings to factory defaults:
1. Turn the radio off.
2. Press and hold in the key, and the MONITOR but-
ton, while turning the radio on.
TIMER MODE
The VXA-700 is provided the “STOP WATCH” timer
and “COUNT DOWN” timer. These can be used for a
variety of time-keeping purposes.
1. Press and hold in the
key while tuning the ra-
dio on, activate the
Timer Mode.
2. Press the MONITOR key to toggle the Timer between
“STOP WATCH” timer and “COUNT DOWN”
timer. If you select the “COUNT DOWN” timer, ro-
tate the DIAL knob to set the values for the timers (1
minutes –59 minutes).
3. Press the PTT switch to start/stop the timer.
4. Turning the radio off, then on again, will return the
VXA-700 to normal operation.
