VXA-700 SPIRIT OPERATING MANUAL
5
CONTROLS & CONNECTORS
(
SIDE PANEL
)
•
PTT
(
Push To Talk
)
Switch
Press this button to transmit when you are operating
in the COM band or 2-m amateur band. Release this
button to return to the “Receive” mode. See page 15.
‚
MONITOR Switch
This button may be pressed to “Open” the squelch
manually, allowing you to listen for very weak sig-
nals. Press and hold this button for 2 seconds to “Open”
the squelch continuously. Press this button again to
resume normal (quiet) monitoring. See page 17.
ƒ
EXT DC Jack
When an external 12-Volt DC power source is avail-
able, you may connect the (optional) E-DC-5B DC
Cable w/Noise Filetr or E-DC-6 DC Cable here.
Do not connect any wire to this jack if that
wire is connected directly to a 28-Volt DC
source. Connecting the VXA-700 directly to a source
which exceeds 15.0 Volts DC will result in damage
to the unit.
•
‚ ƒ
