VXA-700 SPIRIT OPERATING MANUAL
36
Manual Repeater Shift Activation
If the ARS feature has been disabled, or if you need to set
a repeater shift direction other than that established by the
ARS, you may set the direction of the repeater shift manu-
ally.
To do this:
r Press the key, then press the key to activate
the Menu (“SET”) mode.
r Rotate the DIAL selector knob to select Menu Item
“4. Transmit,” then press the key..
r Rotate the DIAL selector knob to select Sub Menu
Item “1. RPT Shift,” then press the key..
r Press the key again to enable adjustment of this
Menu Item.
r Rotate the DIAL selector knob to select the desired
shift among “–RPT,” “+RPT,” and “Simplex.”
r When you have made your selection, press the
key to save the new setting, then press the PTT key
repetitively until the radio exits to normal operation.
ADVANCED OPERATION
(
AMATEUR RADIO BAND
)
Changing the Default Repeater Shifts
If you travel to a different region, you may need to change
the default repeater shift so as to ensure compatibility with
local operating requirements.
To do this, follow the procedure below:
r Press the key, then press the key to activate
the Menu (“SET”) mode.
r Rotate the DIAL selector knob to select Menu Item
“4. Transmit,” then press the key..
r Rotate the DIAL selector knob to select Sub Menu
Item “2. Shift Width,” then press the key..
r Press the key again to enable adjustment of this
Menu Item.
r Rotate the DIAL selector knob to select the new re-
peater shift magnitude.
r When you have made your selection, press the
key to save the new setting, then press the PTT key
repetitively until the radio exits to normal operation.
Note: If you just have one “odd” split that you need to
program, don’t change the “default” repeater shifts using
this Menu Item!
