Filter
Top Products
110 M
ANAGING
THE
VCN A
CCESS
C
ONCENTRATOR
The options in this menu are the same as in the
Concentrator
Configuration Menu
in the LMA interface. For more information, see the
text that follows Figure 77
.
Agent Configuration Menu
To configure VCN AC management, type
5
in the
VCN Access
Concentrator
(Figure 83
) and press <Enter>. The
Agent Configuration
Menu
(Figure 85
) appears:
Figure 85
Agent Configuration Menu
IP Menu
To change IP parameters, type
1
in the
Agent Configuration Menu
and
press <Enter>. The
IP Menu
appears (Figure 79
).
The options in this menu are identical to the options in the
IP Menu
of the
LMA interface. For more information, see the text following Figure 79
.
Set Factory Defaults
To restore the user password and network parameters to the factory
defaults, type
2
in the
Agent Configuration Menu
(Figure 85) and press
<Enter>.
The procedures in this menu are identical to the procedures in the
Set
Factory Defaults
of the LMA interface. For more information, see Set
Factory Defaults, page 103.
Reset Agent
To reset the Management Agent, type
3
in the
Agent Configuration
Menu
(Figure 85
) and press <Enter>.
Configuration Menu
------------------
1. IP Menu
2. Reset to Factory Defaults
3. Reset the Agent card
0. Return to Previous Menu
Please enter your choice: