Filter
Top Products
9(E)
1
5
2
3
4
Attaching the Viewfinder to a Camera
Stopper
Slide rail
Slide guide
Left-right positioning ring
Plug
VF connector
1 Loosen the left-right positioning ring on the
camera.
2 Insert the slide guide which is located on the front
of the camera into the slide rail which is located on
the back of the viewfinder.
3 Slide the viewfinder in the direction of the arrow.
4 Position the viewfinder by sliding it from side to
side, and tighten the left-right positioning ring on
the camera.
5 Connect the plug to the VF connector on the
camera.
Note
Always check to be sure that the plug is firmly
inserted into the camera’s VF connector.
Detaching the viewfinder
To detach the viewfinder from the camera, conduct the
attachment procedure in reverse. When removing the
viewfinder from the camera, pull up the stopper.
Note about loading in carrying case
When loading the camera with viewfinder attached
into a carrying case, make sure that the camera and the
viewfinder fit into the case without having to be
forced. Applying undue pressure can result in damage
to the camera or viewfinder.