Filter
Top Products
-
21
-
C
HAPTER
4
U
SING
W
EB
C
ONFIGUR ATION
You can access and manage the camera through the Web browser and the provided software application
SkyIPCam UltraView. This chapter describes the Web Configuration, and guides you through the
configuration of the camera by using the web browser.
To open the Web Configuration page, please refer to Chapter 3.2, Viewing Image via Your Camera.
After you entered into the Web Configuration of the camera, click Setup on the main page. The Web
Configuration will start from the Basic page.
4.1 Basic Setup
The Basic menu contains three sub-menus that provide the system settings for the camera, such as the
Camera Name, Location, Date & Time, and User management.
Basic >> System
Basic
- Camera Name: Enter a descriptive name for the camera.
- Location: Enter a descriptive name for the location used by the camera.
Indication LED
This item allows you to set the LED illumination as desired. The available options include: Normal, OFF,
and Dummy. You can select OFF to turn off the camera’s LED signal in order to make it less noticeable,
or you can select Dummy to leave the Link LED be on even when it is not connected to the network.