Filter
Top Products
-
25
-
recommended that you input the Default Gateway of your network, which is the IP
address of your router. Check with your router manufacturer for that information.
THIS IS MANDATORY IF YOU WANT TO USE FTP OR EMAIL FUNCTIONS
- PPPoE: Select this option when you use a direct connection via DSL modem. You should have a
PPPoE account from your Internet service provider. Enter your DSL account’s User Name and
Password given by your DSL service provider. The camera will get an IP address from the ISP as
starting up. If you are using a router, do NOT select this option.
NOTE Once the camera gets an IP address from the ISP as starting up, it automatically sends a
notification email to you. Therefore, when you select PPPoE as your connecting type, you have to
set up the email or DDNS configuration in advance.
DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and domain name to a dynamic Internet
IP address. To set up the DDNS:
1. Check Enable checkbox to enable this feature.
2. Select a DDNS Provider from the pull-down list. Please go to the DDNS provider’s website
and register a DDNS account, then you will obtain the information required below.
3. Enter the required information in the Host Name, User Name, and Password boxes.
UPnP
The camera supports UPnP (Universal Plug and Play), which is a set of computer network protocols
that enable the device-to-device interoperability. In addition, it supports port auto mapping function so
that you can access the camera if it is behind a NAT router or firewall. Select the Enable option to
enable this feature.
Ports Number
- HTTP Port: The default HTTP port is 80. Some ISP’s have port 80 blocked. If you are having
problems, you can change it to some other port. The suggested port to be used is anything
between 1024 to 65535
- RTSP Port: Configure the transmission of streaming data within the network. The default RTSP
(Real Time Streaming Protocol) port is 554. To view the real-time streaming image on your
computer, open the RTSP supported player and enter the link:
rtsp://(IP address of the camera)/mpeg4.