Filter
Top Products
-
8
-
2.2 Connecting the Camera to LAN/WLAN
Use the provided Ethernet cable to connect the camera to your local area network (LAN). When you
connect the AC power adapter, the camera is powered on automatically. You can verify the power status
from the Power LED on the front panel of the camera. Once connected, the Link LED starts flashing
green light and the camera is on standby and ready for use now.
If you use a wireless network in your application environment, you need to attach the included external
antenna to the camera. When the camera is powered on, the camera will automatically search any
access point with “airlink101” SSID.
NOTE If the camera cannot connect to your wireless network, you need to
first install the camera in LAN and then proceed with WLAN settings.
Connecting the Ethernet Cable
Connecting the External Antenna