Filter
Top Products
-
40
-
Event Configuration >> Schedule Trigger
You can configure the schedule for trigger function of the camera individually by Email, FTP, and NAS.
Select the Enable option on each item, and then select a Schedule Profile from the pull-down list and
set the Interval time.
Event Configuration >> GPIO Trigger
This feature needs to be configured if you attach a device with GPIO interface to the camera (i.e. alarm
system)
GPIO Trigger: Check the Enable option to enable the GPIO trigger function of the camera, so that
you can set Trigger Out function or send captured images within the detecting area to the FTP server,
email receiver, Network Storage server, or send an instant message. You have to configure
corresponding settings, such as FTP server and email server, to enable this feature.
- Schedule Profile: Select a schedule profile from the pull-down list.
- Action: Set the Trigger Out function or select the destination that the captured images will be
sent to: Save Image to USB, Record to Network Storage, Send Email, or FTP Upload.