Filter
Top Products
-
41
-
4.8 Tools
The Tools menu provides the commands that allow you to restart or reset the camera. You can also
backup and restore your configuration, and upgrade the firmware for the camera.
Factory Reset
Click Reset to restore all factory default settings for the camera.
System Reboot
Click Reboot to restart the camera just like turning the device off and on. The camera configuration
will be retained after rebooting.
Configuration
You can save your camera configuration as a backup file on your computer. Whenever you want to
resume the original settings, you can restore them by retrieving the backup file.
- Backup: Click Get the backup file to save the current configuration of the camera.
- Restore: Click Browse to locate the backup file and then click Restore.
Update Firmware
This item displays the current firmware version. You can upgrade the firmware for your camera once
you obtained a latest version of firmware.
- Select the firmware: Click Browse to locate the backup file and then click Update.
NOTE Make sure to keep the camera connected to the power source during the process of upgrading
firmware. Otherwise, the camera might be damaged because of failure of upgrading firmware.