Filter
Top Products
11
AXIS 233D - Using the Network Dome Camera
Area Zoom
This allows you to draw a box over a desired area to zoom into. To activate, click the
Center button described in the AMC viewer toolbar or in other Internet browsers choose
PTZ > Center. Using your mouse click in the image and while holding down the left mouse
button draw a square over the area you would like to zoom into.
Pan/Tilt/Zoom Controls
The Live View page also displays the Pan/Tilt/Zoom controls. The administrator
can enable/disable the control for specified users under System Options >
Security > Users > User List.
Pan/Tilt/Zoom Control Queue
The time the user is in control of the PTZ settings is limited and a queue of users has been
set up. Use the buttons to request or release control of the Pan/Tilt/Zoom controllers.
The AMC viewer toolbar (AXIS Media Control), available from Microsoft Internet
Explorer, displays the following buttons:
The Play/Stop buttons start and stop the live video stream.
The Snapshot button takes a snapshot of the currently displayed image. The
Snapshot function and the target directory for saving snapshots can be configured
from AMC (AXIS Media Control), which is available from the Windows Control
Panel (Internet Explorer only).
Click the View Full Screen button and the video image will fill the entire screen
area. No other windows will be visible. Press Esc (Escape) on the computer
keyboard to cancel full screen view.
Click-in-image movement
Click the Set emulated joystick mode button and click in the image to move the
camera in the desired direction
Click the Center button and the camera view will center on the position that was
clicked. The location to move to has a definite position, e.g. position x,y.