Filter
Top Products
46
AXIS 233D - System Options
Enable/Disable - When enabled, the AXIS 233D will attempt to configure port mapping in
a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the
camera (see System Options > Network > UPnP).
AXIS Internet Dynamic DNS Service - Use this free service to assign a host name
(user-friendly name) for easy access to your camera. If the IP address of the camera or NAT
router changes, the AXIS Internet Dynamic DNS Service will automatically be updated
with the new IP address.
Use manually selected NAT router - Select this option to manually select a NAT router
and enter the IP address for the router in the field provided.
If a router is not manually specified, the AXIS 233D will automatically search for NAT
routers on your network. If more than one router is found, the default router will be
selected.
Alternative HTTP port - Select this option to manually define an external HTTP port. Enter
the port number in the field provided. If no port is entered here a port number will
automatically be selected when NAT traversal is enabled.
Notes: •An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is useful if
e.g. your NAT router does not support UPnP and you need to manually configure port forward-
ing in the NAT router.
•If a manually selected port is already in use, another will automatically be selected.
•When the port is selected automatically it will be displayed in this field. This can be changed by
entering a new port number and clicking Save.
FTP
The FTP server running in the AXIS 233D enables the upload of e.g. new firmware, user
applications, etc. Check the box to enable the service.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Check the box to
enable the service and enter the RTSP port number to use. The default setting (554) can be
changed to any port within the range 1024-65535.
Network Traffic
Connection Type - The default setting is Auto-negotiate, which means that the correct
speed is automatically selected. If necessary, you can set the connection speed by selecting
it from the drop-down list.