Axis Communications 233D Security Camera User Manual


 
43
AXIS 233D - System Options
Network - Basic TCP/IP Settings
IP Address Configuration
The AXIS 233D supports both IP version 4 and IP version 6. Both versions may be enabled
simultaneously, and at least one version must always be enabled.
When using IPv4, the IP address for the AXIS 233D can be set automatically via DHCP, or
a static IP address can be set manually.
If IPv6 is enabled, the AXIS 233D will receive an IP address according to the configuration
in the network router.
There are also options for setting up notification of changes in the IP address, and for
using the AXIS Internet Dynamic DNS Service. For more information on setting the IP
address, please see the online help.
Notes: • DHCP is a protocol for automatic IP address assignment on a network. IP address assignment via DHCP
may lead to the situation where the IP address changes and you lose contact. Configure the options for
notification of IP address change (under Services) to receive notification from the network camera when
the IP address changes.
• Alternatively, if your DHCP server can update a DNS server, you can access the AXIS 233D by host name
which is always the same, regardless of the IP address.
For more information, please refer to the online help files
Services
Enable ARP/Ping setting of IP address - The IP address can be set using the ARP/Ping
method, which associates the unit's MAC address with an IP address. Check this box to
enable the service. Leave disabled to prevent unintentional resetting of the IP address.
Notes: The ARP/Ping service is automatically disabled 2 minutes after the unit is started, or as soon as an IP address
is set.
Pinging the unit will still be possible when this service is disabled.
Options for notification of IP address change - If the IP address for the camera changes,
e.g. automatically by DHCP, you can choose to be notified of the change. Click Settings...
and enter the required information.
AXIS Internet Dynamic DNS Service - Use the AXIS Internet Dynamic DNS service to
assign a host name for easy access to your AXIS 233D (requires Internet access).
Click Settings... to register the camera with the Axis Internet Dynamic DNS service, or to
modify the existing settings (requires access to the Internet). The domain name currently
registered at the Axis Internet Dynamic DNS service for your product can at any time be
removed.