Filter
Top Products
31
AXIS 233D - Dome Configuration
Dome Configuration
Preset Positions
A preset position is a pre-defined camera view than can be used to quickly move the
camera to a specific location.
From Preset Position Setup, use the Pan, Tilt and Zoom (PTZ) controls to steer the camera
to the required position. When satisfied with the camera's position, enter a descriptive
name. The camera position, iris and focus settings are then saved as a preset position.
The position can be assumed at any time,
by selecting the preset's name from the
Preset positions drop-down list. Preset
positions can be selected in Live View,
from events, in Sequence mode and in
the Guard Tour.
One position can be set as the Home
position, which is readily accessible by
clicking on the H button in both the Preset
Position Setup window and the Live View
window. The position's name will have (H)
added, e.g. Office Entrance (H).
Include the preset position name in the overlay text. See Overlay Settings, on page 19.
Guard Tour
A guard tour displays the different preset positions, one-by-one, in a pre-determined order
or randomly, and for configurable time periods. Once the preset position has been set, and
added to the guard tour, the following settings can be made:
• View Time in seconds or minutes
• Move Speed - sets the speed of the Pan/Tilt movements to the preset position
• View Order (or Random)
OSDI Zones
On-screen Direction Indicator Zones are areas that you define with coordinates and a
descriptive name. These zones can then be included in the Image text to aid the viewer in
navigating the camera.