Filter
Top Products
34
AXIS 233D - Event Configuration
Event Types
An Event Type is a set of
parameters describing how and
when the Network Dome Camera is
to perform certain actions.
Example: If a door is opened, and an event
has been configured to act on this, the Network
Dome Camera can e.g. record and save video
images to an FTP server or send a notification
email to a pre-configured email address with a
pre-configured message. Video images can be
sent as an attachment with the email.
Triggered Event
A Triggered event is activated from, e.g:
• a switch (doorbell) connected to an input port on the Network Dome Camera
• lost signal from the camera
• a manually activated action e.g. from an action button in the web interface
• on restart (reboot) after e.g. power loss
How to set up a triggered event
This example describes how to set the Network Dome Camera to upload images when the
main door is opened:
1. Click Add triggered on the Event types page.
2. Enter a descriptive name for the event, e.g. Main door.
3. Set the priority - High, Normal or Low (see online help files).
4. Set the Respond to Trigger... parameters when the event is to be active,
e.g. only after office hours
5. Select the trigger alternative from the Triggered by... drop-down list, e.g. an Input
port with a connected sensor if the door is opened.
6. Set the When Triggered... parameters i.e. set what the Network Dome Camera is to
do if the main door is opened e.g. upload images to an FTP server.
7. Click OK to save the Event in the Event Types list.
Please use the online help files for descriptions of each available option.