Filter
Top Products
Operating the AXIS 230 AXIS 230
22
Setting up a new event type
Click the menu link to Event Types. This opens the list of event types as in the example
below. The list shows various information about the event types currently configured.
Click the Add button. This launches the Event Type Setup dialog. Depending on the event
type you require, you will then need to provide some or all of the following information:
General
• Name - Give the event type a suitable name.
Respond to Trigger...
This setting determines when an event can be triggered. The options are:
• Always - the event can be activated by the trigger (see below) at any time
• Only during time frame - a trigger will only start the event during the times specified.
Triggers at other times will be ignored. Select the days and set the period’s start time and
Duration. The Duration may be set up to a maximum of 168 hours. If a Duration of more
than 24 hours is required, then only one weekday may be checked. To use two or more
trigger time frames of more than 24 hours - two or more event types (one for each time
frame) must be configured.
• Never - the event type is disabled and no actions will be performed.