Filter
Top Products
AXIS 230 The System Options
29
The System Options
This section lists and describes the administration tools used for the general configuration
of the AXIS 230 - the System Options. The topics covered are, for example, network
settings, date and time settings, users, etc. For information on general usage and how to set
up event types, etc., please see Operating the AXIS 230, on page 15.
The product cannot be configured before it is installed. If you have not yet completed the
installation, please refer to Installing the AXIS 230, on page 11.
Only the product administrator(s) can access these settings.
Important Notes!
Accessing The System Options
The System Options can be used for configuring the AXIS 230 at any time. Follow the
instructions below to access the System Options from your browser:
1. Start your browser and enter the IP address of the AXIS 230 in the address field,
for example:
2. The first time the product is accessed there will be no need to log in. After the Live View
page opens, click on the Setup link and then select the item to configure from the System
Options.
The system is configured and modified directly from these pages. This can be done from
any computer on the network that can access the unit.
Note: Online help is stored internally in the AXIS 230 and is available from the pages in the Web inter-
face. Containing comprehensive details on all product parameters, the on-line help is your first
point of reference when configuring and managing the unit.
• The default password (pass) for the pre-configured user (root) should be changed as soon as possible.
Until this has been done, the security features in the product will not be enabled. Furthermore, all
Axis products are shipped with the same password by default. For further information, refer to Users,
on page 30.
• When accessing the AXIS 230 for the first time, you will not be required to log in.
• Javascript must be enabled in your browser for the AXIS 230 Web-based interface to work.
http://192.168.0.90