Filter
Top Products
AXIS Q6035 PTZ Dome Network Camera
Hardware Overview
SD card slot - A standard or high-capacity SD card (not included) can be used for local recording with removable storage.
NOTICE
To prevent corruption of recordings, the SD card should be unmounted before removal. To unmount, go to Setup > System
Options > Storage > SD Card and click Unmount.
Control button - The control button is used for:
• ConnectingtoanAXISVideoHostingSystemservice.See
page 43
. To connect, press and hold the button for about
1 second until the Status LED flashes green.
• ConnectingtoAXISInternetDynamicDNSService.See
page 43
. To c onnect, press and hold the button for
about 3 seconds.
• Resetting the product to factory default settings. See
page 49
.
Power button - Press the power button to temporarily power the product wh en the dome cover is removed. The power button is also
used with the control button to reset the camera to factory default settings. See
page 49
.
Multi-connector - Terminal connector for connecting external equipment:
• Audio equipment
• Input/Output (I/O) devices
• AC/DC power supply
When connecting external equipment, a multi-connector cable (available from Axis) is required in order to m aintain the product’s IP
rating, see
Multi-Connector Cable (sold separately), on page 58
.
LED Indicators
Color
Indication
Unlit
Connection and normal operation
Amber
Steady during startup. Flashes during firmware upgrade.
Amber/red Flashes amber/red if network connection is unavail able or lost.
Red Flashes red for firmware upgrade failure.
Green Shows steady green for 1
0 seconds for normal operatio n after restart.
Midspan LED Indicators
LED
Color
Indication
Unlit No camera connected.
Green Steady when camera connected, normal operation.
Green, flashing Slow flash when over current or short circuit condition o n the port.
Port
Green, flashing
Fast flash w hen input voltage is out of range or other internal error.
AC input Green Steady when AC power connected.
6