Axis Communications AXIS P1343 Security Camera User Manual


 
AXIS P1343 Network Camera
Accessing the product
AXIS Media Control viewer toolbar
The AXIS Media Control viewer toolbar is available in Internet Explorer only. See AXIS Media Control (AMC), on page 14 for more
information. The toolbar displays the following buttons:
The Play button connects to the Axis product and starts playing a media stream.
The Stop button stops the media stream.
The Snapshot button takes a snapshot of the video image. The location where the image is saved can be specied
in the AMC Control Panel.
Click the View Full Screen button and the vide o image will ll the e ntire screen. Press ESC (Escape) on the computer
keyboard to cancel full screen view.
The Record button is used to record t he curr ent video stream. The loca tion where the recording is saved can be specied
in the AMC Control Panel.
AMC Audio controls
AMC audio buttons control the speakers and microphone connected to the client computer. The buttons are only visible when
audio is enabled.
Speaker button Click to turn the speakers on or off.
Microphone button Click to mute or unmute the micro phone. In Simplex - Network Camera speaker only mode,
click this button to s top sending audio to the product.
Use the slider to control the volume of the speakers and the microphone.
Half-duplex mode
The Talk/Listen button is used to switch between sending and receiving audio. The button can be congured
from the Audio tab in the AMC Control panel:
Push-To-Talk mode: Click and hold the button to talk/send. Release the button to listen.
Toggle mode: Click once to switch between talking and listening.
Simplex – Network Camera speaker only mode
To send audio, the Talk and Microphone buttons must both be enabled. Click either button to stop audio
transmission.
PTZ Controls
The Live View page also displays Pan/Tilt/Zoom (PTZ) controls. The administrator can enable/disable controls for specied users under
System Options > Security > Users.
Note
These controls are available if di
gital PTZ is enabled in the sele cted view area, see View Area, on page 21.
12