Filter
Top Products
MIC Series 500 Camera Navigating the Menus | en 31
Bosch Security Systems, Inc. User’s Manual F.01U.173.601 | 2.0 | 2010.11
5.7 Advanced Setups Menu
The ADV SETUPS menu enables the user to access settings that would not be modified on a
regular basis. It is recommended that these settings be removed from normal access.
MAIN MENU 1/2 ..ADV SETUPS.. 1/4 ..ADV SETUPS.. 2/4
MIC SETUPS IMAGE FLIP ON
ACTIVATE FEATURE PAN REVERSE ON POS DISPLAY LINE 10
PRESET TOUR TILT REVERSE ON MIN INT SPEED 25 FPS
PATTERN TOUR SPEED SCALE 10/10 MAX GAIN LVL 28 DB
PRESETS WIPE MODE NORMAL WIDE-D OFF
COMMUNICATIONS HOME TIME 5 MIN AUTOPAN SPEED 26
ADVANCED SETUPS PROPORTIONAL PTZ ON
ALARMS AUTO LOWLIGHT OFF PAN TIMEOUT
..ADV SETUPS.. ..ADV SETUPS.. 4/4
CLEAR SOFTSTOPS MAP AUX TO PRESET
MANUAL CONTROL FIND END STOPS
WASH WIPE POS RESET TO DEFAULTS
SET ZERO POS
UPPER LEFT SOFTSTOP
LOWER RIGHT SOFTSTOP
LEFT AUTOPAN LIMIT
RIGHT AUTOPAN LIMIT
Menu Item Description Options Default
IMAGE FLIP Manually inverts the image from the camera module, which may be
used on an inverted camera where the head cannot be rotated through
180 degrees. Note: Inverting the image normally requires some
modification of the control direction.
ON/OFF OFF
PAN REVERSE Reverses the direction of the pan control. When the camera is inverted,
this returns the pan control to the correct direction. Ideal for use to
regain logical control if the unit was inverted.
ON/OFF OFF
TILT REVERSE Inverts the tilt rotation of the camera. Reverses the direction of the tilt
control. When the camera is inverted, this returns the tilt control to the
correct direction. For use when the camera is mounted upside down.
ON/OFF OFF
SPEED SCALE This feature provides a way of adjusting the responsivity of the camera
with respect to manual control inputs. The range is from 1 to 20, with
the speed scale approximately matching 5%, so 1 provides a speed
response of 5% and 20 provides full speed at 100%.
1-10 10/10