Bosch Appliances FW5 Security Camera User Manual


 
Camera Browser Interface Camera | en 41
Bosch Security Systems Software manual AM18-Q0605 | v5.0 | 2011.07
9Camera
9.1 Installer Menu
9.1.1 Base frame rate
Select 25 ips or 30 ips as the base frame rate for the camera.
Note:
Shutter times and frame rates are affected by this value.
9.1.2 Mirror image
Select On to output a mirror image of the camera picture.
9.1.3 Flip image
Select On to output an upside down camera image.
9.1.4 Menu button
Select Disabled to prevent access to the install wizard via the
menu button on the camera itself.
9.1.5 Heater (dome cameras only)
Select Auto to let the camera determine when the heater
should be switched on.
9.1.6 Restore all defaults
Click Restore all defaults to restore the factory defaults for the
camera. A confirmation screen appears. Allow 5 seconds for the
camera to optimize the picture after a mode reset.
Camera
> Installer Menu
> Picture Settings
> ALC
> Enhance
> Encoder Profile
> Encoder Streams
> Privacy Masks
> Audio