Filter
Top Products
42 en | Camera Camera Browser Interface
AM18-Q0605 | v5.0 | 2011.07 Software manual Bosch Security Systems
9.1.7 Lens Wizard
Click Lens Wizard... to open a separate window which can be
used to focus the camera lens.
9.2 Lens Wizard
A two-step procedure enables you to focus the lens on a
particular area.
Step 1:
1. Displays the lens type.
2. Allows you to center the back focus to obtain the widest
adjustment range by clicking the Center button.
3. Suggests that you should first adjust the lens manually if
required.
Step 2:
1. Use the mouse to adjust the size and position of the
shaded area in the preview window.
–Check the Show only selected area box to make the
main window zoom in on the selected area.
2. Check the IR corrected lens box to have the same focus
positions for day and night. (To adjust the night focus for a
non-IR corrected lens, the camera must be in the night
mode.)
3. Click Full range autofocus to focus the lens across its full
range.
– The motorised automatic back focus process runs.
– The focus position, state and indicator are shown.
4. Click Local range autofocus to fine focus the lens across
the set range.
– The motorised automatic back focus process runs.
– The focus position, state and indicator are shown.
5. If necessary, manually adjust the focus position with the
slider.