Filter
Top Products
Camera Browser Interface Encoder Settings | en 53
Bosch Security Systems Software manual AM18-Q0605 | v5.0 | 2011.07
10.2 Encoder Streams
10.2.1 H.264 settings
Select H.264 Settings
1. Select the codec algorithm for stream 1. The following are
available:
– H.264 MP 1080p fixed
– H.264 MP 720p25/30 fixed
2. Select the codec algorithm for stream 2. The following are
available:
– Copy Stream 1
– H.264 MP SD
3. Select the Non-recording profile for each stream from the
eight profiles that have been defined.
– This profile is not used for recording. When a stream
is used for recording, the profile selected on the
Recording Profiles page is used.
Note:
The frame rate used for these streams is determined by the
value selected for the Base Frequency in the Installer Menu.
Preview >>
Previews of streams 1 and 2 can be shown.
1. Click Preview >> to display a preview of the video for
streams 1 and 2. the current profile is shown above the
preview.
2. Click 1:1 Live View below a preview to open a viewing
window for that stream. Various additional items of
information are shown across the top of the window.
3. Click Preview << to close the preview displays.
Note:
Deactivate the display of the video images if the performance of
the computer is adversely affected by the decoding of the data
stream.