Bosch Appliances FW5 Security Camera User Manual


 
94 en | Network Camera Browser Interface
AM18-Q0605 | v5.0 | 2011.07 Software manual Bosch Security Systems
15.4 FTP Posting
The FTP server is used for JPEG posting and the export of
recordings.
15.4.1 JPEG posting
Save individual JPEG images on an FTP server at specific
intervals. JPEG resolution corresponds to the highest setting
from the two data streams.
File name
Select how file names are created for the individual images that
are transmitted.
Overwrite: The same file name is always used and any
existing file will be overwritten by the current file.
Increment: A number from 000 to 255 is added to the file
name and automatically incremented by 1. When it reaches
255, it starts again from 000.
Date/time suffix: The date and time are automatically
added to the file name. When setting this parameter,
ensure that the date and time of the device are always set
correctly. For eample, the file snap011005_114530.jpg was
stored on October 1, 2005 at 11.45 and 30 seconds.
Posting interval
Enter the interval in seconds at which the images are sent to an
FTP server. Enter zero for no images to be sent.
15.4.2 FTP server
FTP server IP address
Enter the IP address of the FTP server.
FTP server login
Enter your login name for the FTP server.
FTP server password
Enter the password that gives access to the FTP server.
Path on FTP server
Enter an exact path to post the images on the FTP server.