Filter
Top Products
Camera Browser Interface Recording | en 59
Bosch Security Systems Software manual AM18-Q0605 | v5.0 | 2011.07
11.2 Recording Profiles
A recording profile contains the characteristics of the tracks
that are used for recording. These characteristics can be
defined for ten different profiles. The profiles can then be
assigned to days or times of day on the Recording Scheduler
page.
Each profile is color-coded. The names of the profiles can be
changed on the Recording Scheduler page.
To configure a profile click its tab to open its settings page.
– To copy the currently visible settings to other profiles, click
Copy Settings. A window opens to select the target
profiles for the copied settings.
– If you change a profile’s settings, click Set to save.
– If necessary, click Default to return all settings to their
factory defaults.
Stream profile settings
Select the encoder profile setting that is to be used with stream
1 and 2 when recording. This selection is independent of the
selection for live stream transmission. (The properties of the
encoder profiles are defined on the Encoder Profile page.)
Recording includes
Specify whether, in addition to video data, audio or metadata
(for example alarms or VCA data) should also be recorded.
Including metadata could make subsequent searches of
recordings easier but it requires additional memory capacity.
Without metadata, it is not possible to include video content
analysis in recordings.