Filter
Top Products
High Speed Pan/Tilt System Moving Around the Menus | en 33
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
Fig. 10.1 Accessing the Main Menu - AUX On 200
Fig. 10.2 Accessing the Dinion
XF
camera Setup Menu - AUX On 46
(screen may differ depending on the camera type)
10.1 Keyboard Commands List
Setup and Configuration
Open OSD configuration: AUX ON - 200 - Enter
Dinion
XF
main menu on: AUX ON - 46 - Enter
Dinion
XF
installation menu on: AUX ON - 801 - Enter
Receiver reset/home: AUX ON - 911 - Enter
Receiver offset re-calibration: AUX ON - 204 - Enter
Auxiliary Connections
Relay number 2 activation: AUX ON - 65 - Enter
Relay number 2 de-activiation: AUX OFF - 65 - Enter
Wiper start: AUX ON - 202 - Enter
Wiper stop: AUX OFF - 202 - Enter
Washer start: AUX ON - 201 - Enter
Presets
Store preset position: Show Shot - n - Enter (n = 01 - 99, i.e. 99 presets)
Move to a preset position: Show Shot - n - Enter (n = 01 - 99, i.e. 99 presets)
Erase preset position: Show Shot - 9n - Enter (n = 01 - 99, e.g. to erase preset position #31,
then push Show Shot - 931 - Enter)
Standard preset patrol start: AUX ON - 8 - Enter
Standard preset patrol stop: AUX OFF - 8 - Enter
Recalibrate presets: AUX ON - 204 - Enter
Autopan (requires left and right limits to be set in OSD)
Autopan start: AUX ON - 1
- Enter
Autopan stop: AUX OFF - 1 - Enter
MAIN MENU
1 - LANGUAGE
2 - DISPLAY SETUP
3 - MOTION PARAMETERS
4 - CAMERA PARAMETERS
5 - LOAD DEFAULT CONFIG
6 - SETUP INFO
MODE
ALC 2
ENHANCE
COLOR
BLC OFF
VMD OSD
MODE ID TRAFFIC
DEFAULTS
EXIT