Filter
Top Products
High Speed Pan/Tilt System Configuring the System | en 39
Bosch Security Systems Instruction Manual F01U.073.990 | Version 1.0 | 2007.07
The character being edited flashes and the joystick (up and down) can be used to change it.
After making the change, confirm and continue to edit the text, or else exit with the Iris but-
ton.
Fig. 11.6 Edit Text Menu
Offset Pan
By default, the offset pan is +0.00. The value can be changed to move the default pan position
of the unit to wherever is convenient. For example, if the installation requires that the NORTH
position should be at 0.00 ° (pan), then an offset pan can be entered to compensate for any
deviation from NORTH. After mounting, the NORTH position was found to be +41.37 ° (pan
position); therefore, the offset pan should be set to - 41.37 ° to make the pan +0.00 ° position
point to NORTH.
This has an effect on the Area Titles as defined in the Area Position menu. In the above exam-
ple, after the offset pan has been set to -41.37 °, the Area Text Menu "1 - Area" could be
changed to "1 - NORTH" to display NORTH on the screen at pan +0.00 ° position.
11.2.3 Display Parameters
The Display Parameters menu is used to enter the settings menus for the device movement
parameters.
EDIT TEXT MENU
v _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
>1ABC 2DEF 3GHI4JKL
5MNO 6PQR 7STU 8VWX
9YZ 0()x +,-.
DISPLAY PARAMETERS
1 - OSD VIDEO ENABLING : YES
2 - VIDEO CHARACTER TYPE : 000
3 - HORIZONTAL DELTA : 000
4 - VERTICAL DELTA : 000
5 - ADDRSS NUMBER YES
Fig. 11.7 Display Parameters Menu
OSD Video Enabling Set to YES to superimpose the menu text over the video signal
from the camera. Set to NO to have a blue screen behind the
menu TEXT.
Video Character Type Set to 0 to make the background of the text to transparent; set to
1 to make it black.
Horizontal Delta/Vertical
Delta
These set the position of reference to the titler so that the text
can be centralized.
Address Number If enabled, the address number of the unit is shown at the top left
of the screen during normal operation.