Filter
Top Products
38 en | Configuring the System High Speed Pan/Tilt System
F01U.073.990 | Version 1.0 | 2007.07 Instruction Manual Bosch Security Systems
Fig. 11.5 Setting the Area Position Values
11.2.2 Changing the Edit Text Menu
To change the text within the Edit Text menu, proceed as follows:
1. Upon accessing the Edit Text menu, select String Edit. The first field flashes a "v", indi-
cating it is in Edit mode (see Figure 11.6).
2. Press the Focus button. The cursor flashes at the bottom of the screen, corresponding to
the groups of alpha/numeric characters. Operate the joystick (up, down, left, and right)
to select a group of characters.
3. Press the confirmation (Focus) button to confirm the alpha/numeric group containing the
character to be added. The first value in the sequence you selected starts flashing.
4. Move the joystick up or down to choose a value.
5. When finished, press the Focus button to confirm your choice. The "v" automatically
moves to the right.
6. Repeat steps 2-5 until finished.
7. When finished, press the Iris button to exit the menu.
80°
120°
0°
+/-180°
i
NOTICE!
To skip a space while in edit mode, press the Iris button, then move the
joystick to the right past the number spaces you would like to skip. Press the
Focus button to resume adding values.