Filter
Top Products
135
Additional Information
If you record in both SP and LP modes on the same tape, the playback picture may become
distorted, and the time code may not be written correctly.
If you play back on this camcorder, a tape that was recorded in LP mode with another digital device
or vice versa, the picture and sound may become distorted.
1
Available only when recording in standard definition (SD).
[OUTPUT LEVEL]: Select the amplitude of the audio output signal.
1
Available only when you press the SET button within the time set for the [CAMERA SETUP] [REVIEW] setting (or
immediately after recording if it is set to [OFF]).
AUDIO SETUP
Menu item Setting options
AUD.M.SET CH , CH , MIX/FIXED, MIX/VAR. – – – 59
MIX BALANCE – – – 90
DV AUDIO 16bit, 12bit
1
– – 57
MONITOR SEL. NORMAL, LINE OUT – – – 90
WIND SCREEN ON , OFF – – 57
MIC SENSIT. NORMAL, HIGH – – 57
XLR 1 TRIM +12dB, +6dB, 0dB, -6dB, -12dB – – 59
XLR 2 TRIM
OUTPUT LEVEL 1Vrms, 2Vrms – 90
XLR ALC LINK LINK, SEP – – 59
AUD.LIMITER ON, OFF – – 59
CARD OPERATIONS
Menu item Setting options
ERASE ALL PRINT ORD NO, YES – – – 132
ERASE ALL IMAGES NO, YES – – – 129
INITIALIZE CANCEL, INITIALIZE, COMPL.INIT. – – – 131
After opening the menu from the index screen:
PROTECT – – – – 130
PRINT ORDER – – – – 132
After pressing the SET button:
IMAGE ERASE CANCEL, ERASE – –
1
129
PROTECT OFF, ON – –
1
130
PRINT ORDER 0 COPIES – – – 132
SLIDESHOW CANCEL, START – – – 127
1/2 3/4
1/2 3/4