Filter
Top Products
86
Connection to a High Definition Monitor or HDTV
Using the HD/SD SDI Terminal
Activate the HD/SD SDI output and select the appropriate video output option (HD or SD).
1. Set the dial to .
2. Open the menu and select [SIGNAL SETUP]. Select [SDI OUTPUT] and set it to [ON] or
[ON(OSD)].
3. From the same [SIGNAL SETUP] submenu select [SDI SPEC.]. Select [AUTO] or
[SD LOCKED] to match the video output you wish to use.
4. Close the menu.
When [SDI OUTPUT] is set to [ON(OSD)], will appear on the screen and on-screen displays will
be included in the video signal output from the SDI terminal.
When [SDI OUTPUT] is set to [ON(OSD)]:
The on-screen displays included in the video output signal are determined by the display level
selected with the EVF DISPLAY button ( 39). Markers (safety zone guide, level/grid markers,
etc.) are never included in the video signal output.
The [SIGNAL SETUP] [COMP.OUT] setting is not available.
1
AUDIO
VIDEO
R
L
S (S1)-VIDEO
INPUT
Stereo Cable*
(supplied)
BNC Cable (commercially available)
Signal flow
Signal flow
Open the terminal cover
* If [SDI OUTPUT] is set to [OFF] (no embedded audio), the audio signal is separate from the SDI video
output signal
White
Red
White
Red