Filter
Top Products
87
External Connections
Using the COMPONENT OUT Terminal
Select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP.OUT], select a setting option
and close the menu.
Using the HDV/DV Terminal
• When connecting the camcorder to a monitor or TV that supports DV input, you may need to carry out a
procedure on the monitor or TV to recognize the camera.
• If necessary, turn on the DV conversion and select whether to convert a tape recorded in HD to SD with the
following procedure.
Open the menu and select [SIGNAL SETUP]. Select [HD DOWN-CONV], select a setting
option and close the menu.
2
AUDIO
VIDEO
R
L
S (S1)-VIDEO
INPUT
Signal flow
Stereo Cable*
(supplied)
Signal flow
DTC-1000 Component Video Cable (supplied)
Open the terminal cover
Red
Blue
Green
White
Red
White
Red
* The audio signal is separate from the component video signal
Y
Pb
Pr
3
CV-250F
DV Cable (optional) or
commercially available
6 pin-6 pin DV cable
4-pin
6-pin