Filter
Top Products
96
You can choose a specific subject or person's face, or a location on the
screen, to focus on and shoot.
Choose the subject, face or
location to focus on.
z Touch the subject or person shown on the
screen.
X When the AF frame mode is set to [Face
Detect], the camera will beep and display
when it detects the subject. The
camera will continue to focus even if the
subject moves.
X When the AF frame mode is set to [Fixed
frame], an AF frame will appear at the
location where you touch the screen.
z To cancel, touch ^.
Shoot.
z Press the shutter button halfway. The
frame where the camera focused will
change into a green .
z Press the shutter button fully to shoot.
Choosing the Subject to Focus On
(Touch AF)
What if Touch AF is not available?
You can activate Touch AF by touching on the screen to change it to
(p. 27). You can also touch H, then n to choose [Touch Shutter] in the
4 tab and choose [Off].
A border appeared around the screen when it was touched
Touch operations on faces or subjects appearing outside the border will not work.
They will work if the face or subject move inside the border.