Filter
Top Products
3-5
NC Viewer and Viewer Switcher
Specify a camera or select a camera from the Camera List when you start the NC Viewer.
You can switch from a connected camera to another camera, or open multiple NC Viewer windows
and display separate cameras in them.
You can launch another NC Viewer window or switch to a viewer other than the VB-C300 by using
the Viewer Switcher (
→
P. 3-34).
Connecting to a Specified Camera
To connect to the camera ...
Connecting to Camera
1. Choose “Connect” from the File
menu bar.
2.
A dialog box to select a camera appears.
Enter connection settings and click “OK”.
1 Host Name
Enter the IP address or host name set on
the camera (→ P.1-17).
2 User Name
Enter the user name to connect to the
camera. Users can be authorized users
registered on the camera (→ P.1-15) or
administrator “root”.
3 Password
Enter the password for the specified user name.
4 HTTP Port
Enter the HTTP port number set on the camera (→ P.1-12). Use default setting (80) if you do
not need to change.
5 Send and receive audio
Check this box and connect a microphone and speaker with amp to the camera if you want to
send and receive audio via the NC Viewer (→ P.3-23). Authorized User can only receive
audio. You need other settings to transmit or receive audio (
→
P.1-14).
6 Remember password
Check this option to save the password.
7 Option button
Click “Option” to open the Connection Setting Option dialog to register a camera. If you register
a camera in this dialog, you can select the camera from the camera list box in the next sessions.
Check the Add to camera list option to enter the name of
the camera in the Nickname text box. Click “OK” after
entering information to register the camera. You can use
up to 32 characters.
5
6
7
1
2
3
4