Filter
Top Products
4-6
Log Messages
● B103 Client forcibly disconnected (notice)
● B301 Transmission audio device error (err)
● B401 Audio device initialization failed (crit)
● B402 Audio Server initialization failed (crit)
● B403 Setting change failed (crit)
■ System Log Messages
● S004 System start and stop (info)
● S005 System setting changed (info)
● H043 User specification error (notice)
Message %1 request denied [%2]
%1 Client host IP address
%2 Rejection type (41 | 43 | ...)
Explanation Although connection was allowed at the start of session, the settings have been changed to ban
the client access and the client has been forcibly disconnected from the Audio Server (the rejection
types are the same as B102).
Message cannot use audio device for tx [%1 : %2]
%1 Error process (ld | buff)
%2 Error number
Explanation An audio device error has been detected.
Countermeasure Reboot the Camera. If the problem persists, it is an Audio Device failure. Call for service.
Message audio device initialization error [%1]
%1 Error number
Explanation The Audio device failed to initialize itself. The Audio Server stops.
Countermeasure Reboot the Camera. If the problem persists, it is an Audio Device failure. Call for service.
Message wvaudio initialization error [%1]
%1 Error number
Explanation The Audio Server failed to initialize itself. The Audio Server stops.
Countermeasure Reboot the Camera. If the problem persists, it is an Audio Server failure. Call for service.
Message cannot set config [%1]
%1 Error number
Explanation Update of settings failed. The Audio Server stops.
Countermeasure Reboot the Camera. If the problem persists, it is an Audio Server failure. Call for service.
Message %1 webview
%1 Start (starting) or stop (stopping)
Explanation This message indicates start or stop of the Video Server (webview).
Message %1: user %2 not found: %3
%1 Client host IP address
%2 User Name
%3 URL
Explanation An unknown user has been specified in user authentication.
Message System settings updated
Explanation The settings have been changed without reboot.