Filter
Top Products
120 Video
NOTES
• When you are using a microphone connected to the MIC terminal,
including the WM-V1 Wireless Microphone, the audio level indicator will
be displayed automatically.
• When the audio level meter reaches the red point (0 dB), the sound may
be distorted.
• If the audio level is too high and the sound gets distorted, activate the
microphone attenuator with the p > [Microphone Attenuator] set-
ting (or [Surround Mic Attenuator] when the optional SM-V1 Surround
Microphone is attached to the camcorder).
• We recommend using headphones to check the sound level while
adjusting the audio recording level or when the microphone attenuator
is activated.
•See Specifications (A 238) for additional notes about the [š SCN:
Underwater] and [Ÿ SCN: Surface] recording programs.
Using Headphones
Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/× terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to × (headphones) output.
Operating modes:
1Press .
2 Change the function of the terminal to headphones output.
3 Connect the headphones to the AV OUT/× terminal.
[ Other Settings] > q > [AV/Headphones] >
[Ó Headphones] > [K]
COPY