Filter
Top Products
Video 97
- White points may appear on the screen.
- Autofocus may not work as well as in other modes. In such case,
adjust the focus manually.
•[Š SCN: Fireworks]:
- To avoid camera blur (blur due to the camcorder moving) we
recommend using a tripod.
- When the optional Wide-converter or Tele-converter is attached to the
camcorder, autofocus will not be effective. Make sure to focus
manually (A 108)
•[š SCN: Underwater]/[Ÿ SCN: Surface]:
- Use these recording programs when making recordings while the
camcorder is in the optional WP-V4 Waterproof Case.
- When using the [š SCN: Underwater] recording program, a red
frame will appear on the edge of the screen.
-The [š SCN: Underwater] recording program is for making
recordings underwater*. When using underwater lighting equipment or
making recordings while on land, we recommend using the [Ÿ SCN:
Surface] recording program.
- To switch the recording program between [š SCN: Underwater] and
[Ÿ SCN: Surface] while the camcorder is in the waterproof case,
turn on the camcorder while moving the zoom lever toward S or T.
Keep pushing the zoom lever until the š or Ÿ icon appears on the
screen.
- ? will appear on the screen when the camcorder’s temperature
becomes too high. If this happens, turn off the camcorder, take it out
of the waterproof case and keep it in a cool place until the
temperature goes down. If the camcorder becomes too hot, it will turn
off automatically.
- When making recordings underwater with the [š SCN: Underwater]
recording program, the image on the LCD screen will appear redder
than the actual subject. This will not affect the recording.
- When a commercially available wide-converter or other accessory is
attached to the waterproof case, the camcorder may focus on the
accessory. In such case, move the zoom lever toward S to focus on
the subject.
-See Specifications (A 238) for additional notes about the [š SCN:
Underwater] and [Ÿ SCN: Surface] recording programs.
* Underwater is a unique environment that is ever-changing, depending on factors
such as the weather and water conditions. In addition, water absorbs red light,
which causes objects to appear bluer and greener.
COPY