Filter
Top Products
108
1
2
3
4
5
6
7
8
9
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
•Not all of your DPOF settings may be applied in printing by the
printer or photo development service, in some cases.
•
[ ] may be displayed on the camera to warn you that the memory card
hasprintsettingsthatwereconguredonanothercamera.Changing
the print settings using this camera may overwrite all previous settings.
•
Setting [Date] to [On] may cause some printers to print the date twice.
• Specifying [Index] will prevent you from choosing [On] for both [Date] and [File
No.] at the same time.
• The date is printed in a format matching setting details in [Date/Time] on the
[3] tab, accessible by pressing the <n> button (=
14).
• Index printing is not available on some Canon-brand PictBridge-compatible
printers (sold separately).
Still Images
Setting Up Printing for Individual Images
1 Choose [Select Images & Qty.].
Press the <n> button, choose
[Select Images & Qty.] on the [2] tab,
and then press the <m> button.
2 Choose an image.
Press the <q><r> buttons or turn the
<5> dial to choose an image, and then
press the <m> button.
You can now specify the number of copies.
If you specify index printing for the image,
it is labeled with a [
] icon. To cancel
index printing for the image, press the
<m> button again. [
] is no longer
displayed.
3 Specify the number of prints.
Press the <o><p> buttons or turn the
<5> dial to specify the number of prints
(up to 99).
To set up printing for other images and
specify the number of prints, repeat steps
2 – 3.
Printingquantitycannotbespeciedfor
index prints. You can only choose which
images to print, by following step 2.
Whennished,pressthe<n> button
to return to the menu screen.
Still Images
Setting Up Printing for a Range of Images
Following step 1 in “Setting Up Printing
for Individual Images” (=
108), choose
[Select Range] and press the <m>
button.
Follow steps 2 – 3 in “Selecting a Range”
(=
76) to specify images.
Press the <o><p> buttons to choose
[Order], and then press the <m> button.