Canon 8410B001 Digital Camera User Manual


  Open as PDF
of 135
 
30
1
2
3
4
5
6
7
8
9
Cover
Before Use
Common Camera
Operations
Advanced Guide
Camera Basics
Auto Mode
Other Shooting
Modes
P Mode
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
Tv, Av, and M
Mode
Still Images
•A blinking [ ] icon warns that images are more likely to be blurred
by camera shake. In this case, mount the camera on a tripod or take
other measures to keep it still.
•Ifyourshotsaredarkdespitetheashring,moveclosertothe
subject.Fordetailsontheashrange,see“FlashRange”(=
129).
•The subject may be too close if the camera only beeps once when
you press the shutter button halfway. For details on the focusing
range (shooting range), see “Shooting Range” (=
130).
•To reduce red-eye and to assist in focusing, the lamp may be
activated when shooting in low-light conditions.
•A blinking [h] icon displayed when you attempt to shoot indicates
thatshootingisnotpossibleuntiltheashhasnishedrecharging.
Shootingcanresumeassoonastheashisready,soeitherpress
the shutter button all the way down and wait, or release it and press
it again.
•Although you can shoot again before the shooting screen is
displayed, your previous shot may determine the focus, brightness,
and colors used.
• You can change how long images are displayed after shots (=
41).
Movies
•Keepyourngersawayfromthe
microphone while shooting movies.
Blocking the microphone may prevent
audio from being recorded or may
causetherecordingtosoundmufed.
•Avoid touching camera controls other than the movie button when
shooting movies, because sounds made by the camera will be
recorded.
• Audio is recorded in stereo.
Microphone
 previous next