Canon A2400 IS Digital Camera User Manual


 
Shooting Range and Focusing
102
Choose a subject to focus on.
z Aim the camera so that is on the desired
subject, and then press the q button.
XWhen the subject is detected, the camera
beeps and is displayed. Even if the
subject moves, the camera will continue to
track the subject within a certain range.
XIf no subject is detected, is displayed.
z To cancel tracking, press the q button again.
Shoot.
z Press the shutter button halfway.
changes to a blue , which follows the
subject as the camera continues to adjust the
focus and exposure (Servo AF) (p. 103).
z Press the shutter button all the way down to
shoot.
XEven after your shot, is still displayed and
the camera continues to track the subject.
[Servo AF] (p. 103) is set to [On] and cannot be changed.
Tracking may not be possible when subjects are too small or move
too rapidly, or when subject color or brightness matches that of the
background too closely.
[AF-Point Zoom] on the 4 tab is not available.
e and u are not available.
The camera can detect subjects even if you press the shutter button halfway
without pressing the q button. After your shot, is displayed in the center of
the screen.