Filter
Top Products
Using Optional Accessories
146
Powering the camera with AC Adapter Kit ACK800 and DC Coupler DR-
DC10 (both sold separately) eliminates the need to monitor the remaining
battery level.
Make sure the camera is off.
Open the cover.
z Follow step 1 on p. 19 to open the memory
card/battery cover, and then open the coupler
cable port cover as shown.
Insert the coupler.
z Insert the coupler as shown.
z Make sure the coupler cable passes through
the port.
Close the cover.
z Lower the cover ( ) and hold it down as you
slide it until it clicks into the closed position
().
Powering the Camera with Household Power
A1300 A810