![](http://pdfasset.owneriq.net/1/7f/17fea04b-7ff2-4c37-904b-7612653e5836/17fea04b-7ff2-4c37-904b-7612653e5836-bg13.png)
15
If the Digital Signature Not Found window
appears, click [Yes].
The USB driver will automatically finish installing onto the computer when you attach the
camera and open a connection.
Dialogs similar to the following will appear during this process (first time the camera is
connected to a computer only).
Windows XP
The dialog on the right will appear after a
few moments.
Windows 2000/Windows Me/Windows 98 SE
Restart the computer according to the instructions if you are prompted to do so by a
message.
A dialog allowing you to set the default settings will display after installation. See Using
the Software on the Windows Platform
– The Basics (p. 16) for the subsequent
procedures.
This concludes the software and USB driver installation and the procedures for connecting the
camera to the computer.
You may now download camera images to the computer (p. 16).
Procedures for attaching the camera to the computer and placing the
camera in the correct mode for connecting vary between camera models.
See the Camera User Guide.
•See USB driver installation not proceeding well in the Troubleshooting
section (p. 78) if you are having problems installing the USB driver.
•See Uninstalling the USB Driver (p. 75) to delete the USB driver installed
with these procedures.
•See If You Were Using ZoomBrowser EX Version 2 or 3 (p. 85) if you
were previously using either version.
SSG.book Page 15 Tuesday, November 22, 2005 12:19 PM