Canon MV4i Camcorder User Manual


 
110
E
Using a Memory Card
(MV4i MC only)
1. During/after recoding a still image, press the CARD button to
open the CARD PHOTO REVIEW menu.
If you press the button after recording a still image, the last image recorded
appears in the display.
If you press the button while recording a still image, the menu appears
immediately.
PROTECT , IMAGE ERASE settings appear.
If you select |RETURN, the still image disappears.
2. Select PROTECT and press the SELECT dial in.
The protect mark appears on the image.
Now you are unable to erase this image.
Press the SELECT dial again to cancel it.
If you select |RETURN, the still image disappears.
2. Select IMAGE ERASE and press the SELECT dial in.
ERASE THIS IMAGE? NO YES appears in the display.
3. Select YES and press the SELECT dial in.
The image is erased.
To erase an image
To protect an image
CARD PHOTO REVIEW
Erasing still images
Erase images singly or all at once.
You cannot erase protected images. Cancel image protection first in order to
erase an image.
Erase images with caution. Once an image has been erased, it cannot be restored.
There are 3 ways to erase a single image.
To erase images one at a time
1. CARD PHOTO REVIEW menu ( 110)
2. File Operation menu ( 111)
To erase images one at a time or erase all images on the memory card at once
3. Card Operations submenu ( 115)
: When playing back an image in CARD PLAY mode
: When displaying an index screen in CARD PLAY mode
INDEX
SINGLE
SINGLE
CARD
PLAY
SINGLE
CARD
PLAY
CARD
REC
CARD
REC
#5_MV4/MV4 MC-i_E(98-125) 01/7/31 10:34 Page 110 (1,1)