Filter
Top Products
89
E
Editing
• When you add sound using the built-in microphone make sure not to connect
any cables to the MIC terminal (on the DU-300).
• To use your TV to monitor video, connect the S-video terminal ( 29) or the
A/V terminal (use only the video plug) to your TV. You can monitor the sound
with headphones ( 65).
Audio Dubbing
MIC
- For MV4 (For MV4i/MV4i MC, 92).
You can add sound to the original sound on a pre-recorded tape recorded in the
SP mode with 12-bit sound. Use the internal or an external microphone. The
original sound will not be erased.
For best results, add sound to tapes that have been recorded with this camcorder
in SP mode with 12-bit sound. If there are non-recorded portions on the tape, or
portions recorded in a mode other than SP mode, or with 16-bit or 12-bit, 4-
channel sound, dubbing will stop. You cannot dub audio onto a tape recorded with
12-bit and 16-bit sound intermingled.
To connect an external microphone:
Connect the DU-300 Docking Unit ( 27) and the optional SA-1 Adapter
Bracket ( 65) in order to use an external microphone.
Preparations
Turn the camera’s POWER dial to PLAY and load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed
position).
#4_MV4/MV4 MC-i_E(80-97) 01/7/31 10:32 Page 89 (1,1)